汽車解決方案

Confirmed! LAUNCH-X431 ECU & TCU Programmer can read chip ID, read and write EEPROM and Flash data on Geely Bosch MED17.8.10 ECU by Bench. No need X431 tablet! Only 3 mins!

STEP 1.Obtain ECU Model

Connect X431 ECU Programmer to a computer via USB cable

Open X-431 ECU & TCU Programmer software

Input med17.8.10 in the search box to quickly find the ECU model

It’s Geely Boyue 2017–2019 MED17.8.10 HW2_TC1782

Select BENCH mode

STEP 2.Connect device and ECU

Double click the ECU to enter the main operation interface

Obtain the wiring diagram by clicking "Direct connection of diagram"

Follow the diagram to connect X-431 ECU Programmer and Bosch MED17.8.10 ECU with the BENCH harness properly

Connect the power supply to the programmer as well

Start to read and write ECU.

STEP 3. Backup the original MED17.8.10 ECU data

Read chip ID

Read EEPROM data and Flash data

Save the original data after reading

Disconnect

STEP 4.Backup the new MED17.8.10 ECU data

Connect Launch ECU Programmer to a new ECU, and repeat the same steps to back up the new ECU

STEP 5.Write the original ECU data into new ECU

Upload the original data to write into the new MED17.8.10 Bosch ECU

Write data successfully

Disconnect

LAUNCH-X431 X-PROG3 with PC Adapter also can clone MED17.8.10 Bosch ECU the same as X-431 ECU Programmer.

www.obdexpress.co.uk